|
|
Conference Format 3 Parallel Sessions
Some of the spaces have not been allocated yet, these are marked
| This is a provisional draft. In order to retain a balance of interest, we reserve the right to alter the running order at a later date. |
| |
Wednesday 21st September 2005 |
09.00-09.10 |
WELCOME - CONFERENCE CHAIRMAN |
09.10-09.40 |
DR. GRAHAM FAIRHALL
Chief Technology Officer
Nexia Solutions |
09.40-10.30 |
RICHARD WILLIAMS
Concentrated Dispersions - Wireless Intelligent Particles |
10.30-11.00 |
Exhibition Commences & Coffee |
| |
Ballroom
Nanoparticles – characterisation and kinetics
Session chair : R.Williams |
Blenheim Suite
Concentrated Dispersions
Session Chair : R.O’Brien |
Packwood Suite
Bulk Powder Characterisation
Session Chair : Richard Challis |
11.00-11.20 |
001 Deformation of NaCI particle in contact at the nano-scale
K.Kendall, C.W.Wong, W.Smith |
012 A study of the ultrasonic effect on BaSO4 homogeneous nucleation during reactive crystallization
Z.Guo, A.G.Jones and N.Li |
107 Fabrication and Handling aspects of highly reactive powders
P.Towndrow |
11.20-11.40 |
026 Development of a Photon Correlation Specroscopy Instrument to measure size distributions on Nanoparticles
T.Yamaguchi |
090 The effect of hydrodynamic and mixing on the precipitation of calcium oxalate in a stirred tank reactor
J.N.Haque, T.Mahmud, K.J.Roberts, A.Milliken |
051 From single particle interactions to bulk powder flow:application to uranium oxide powders
M.Quintanilla, M.George, D.Goddard, J.T. Semeraz |
11.40-12.00 |
064 Monitoring crystallisation of organic materials via ATR FTIR and ultrasound spectroscopy techniques
R.Penchev, K. Roberts, R.Tweedie, X.Z.Wang |
100 Recent developments in membrane emulsification
M.A.Khan, R.A. Williams, R.Hou |
112 Development and application of a uniaxial type flowability tester for characterising bulk solids
S.J.Wiche, A.W.Roberts, W.McBride |
12.00-12.20 |
104 Nanoparticle Systems Characterisation in Suspensions
M. Stintz, U. Katzel |
022 Particle Surface Polymerisation of Stimulus responsive brush layers: preparation and characterisation
G.B.Webber, S.Biggs, S.P.Armes |
003 A novel experimental study of temperature enhanced cohesive interparticle forces
S.Simons, P.Pagliai, D.Rhodes |
12.20-13.15 |
Lunch |
13.15-14.05 |
RICHARD CHALLIS
Ultrasound-Process Monitoring with a Sound Future? |
| |
Ballroom
Nanoparticles – characterisation and kinetics
Session Chair: Simon Biggs |
Blenheim Suite
Concentrated Dispersions
Session Chair: Stefaan Simons |
Packwood Suite
Bulk Powder Characterisation
Session Chair: Mark Jones |
14.10-14.30 |
118 Consolidation of concentrated dispersions of nano and microparticles determined by analytical centrifugation
D.Lerche, T.Sobisch |
030 The effect of ion valency and concentration on the transport propertiesof oxide dispersions
A.Tindley, S.Biggs |
085 A CFD analysis of the Stable Microsystems powder flow analyser(PFA) with an experimental comparison.
A.Cowell, D.McGlinchey, R.Ansell |
14.30-14.50 |
009 Micron sized nano-materials
A.Rawle, |
046 Comparative studies of dispersant optimisation techniques for evaluating the stability of concentrated alumina slurries
S.Gaydardzhiev, P.Ay, Marta Janeczko |
006 Strength and behaviour of LAS acid liquid bridges
S.Germana, S.Simons, J.Bonsall |
14.50-15.10 |
117 Particle size distribution by space or time dependent extinction profiles obtained by analytical centrifugation
T.Detloff, T.Sobisch, D.Lerche |
078 Application of a QCM-D to determine the stability of colloidal suspensions
D.Harbottle, G.Webber, K.Galvin, M.Fairweather
et al
|
060 Measuring the flow properties of consolidated, conditioned and aerated powders- a comparative study using a powder rheometer and a rotational shear cell
R.Freeman |
| 15.10-15.30 |
127 Characterisation issues in evaluating the toxicity of nanoparticles
M.Palazeulos, V.Kuder, Kevin Powers |
049 Linear EIT for settling and settled material characterisation
J.Cullivan, M.Wang, R.Williams, G.Baker |
039 Characterising bulk solids using a profiling technique that helps solve flow problems
E.McGee and D. Mc.Glinchey |
15.30-16.00 |
Coffee |
16.00-16.20 |
025 Protein and nanoparticle characterisation using light scattering techniques
M. Kaszuba, M.Connah |
054 A fundamental study of the semi-continuous precipitation of cerium(lll) oxalate
R.Hammond, M.Bennett, T.Mahmud, K.Roberts |
065 Measurement and modelling of a particulate assembly under confined compression
J.Ooi, Y.C.Chung, J.Favier |
16.20-16.40 |
059 Photluminescence properties of zinc sulphide nanoparticles prepared in W/O microemulsion system
Y.Arao, T.Tohyama, K.Tsuchiya, Y.Mori |
063 Filtration characteristics of an experimental colloid
R.Nabi, S.Biggs, C.Poole, D.Hebditch et al |
122 Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester
J. Ratnaswamy Pillai, R.J. Berry, M. Bradley |
16.40-17.00 |
094 Strong ultrasonic attenuation by nano-porous particles
R.W.O’Brien |
99 Characterisation of the dispersion behaviour of various powders in liquids
C.Goalard, R.Samini, L.Galet, J.A.Dodds |
120 Investigation of the effect of geometric factors and test procedure factors on the failure loci measurements obtained in annular type shear testers
R.J.Berry, M. Bradley |
1700-17.20 |
126 Nano-particle tracking analysis – The Nanosight Halo LM10 system
Bob Carr, T.Diaper and E.Barrett |
125 Parameterisation of a mathematical model to describe the settling behaviour of corrosion products of used nuclear fuel
J.S.Small, S.Kwong, G.A.Mackay |
130 Terahertz pulsed spectroscopy for characterising particles
Y.C. Shen, D.A. Newnham, P.F. Taday, P. Smith
|
17.20-19.00 |
Poster Session, Exhibition and Drinks Reception
|
|
17.30-18.30 |
Innovators Forum |
|
| This is a provisional draft. In order to retain a balance of interest, we reserve the right to alter the running order at a later date. |
|
Thursday 22nd September 2005 |
08.50-09.40 |
ARNIE DUNCAN
Statistics Used In describing A Powder’s Distribution |
09.40-10.30 |
MARK JONES
The Use Of Bulk Properties For The Prediction Of Pneumatic Conveying Performance-Current Practice and Future Directions
|
10.30-11.00 |
Coffee |
| |
Ballroom
Measurements methods for size,shape and surface structure
Session Chair: Christian Seiler |
Blenheim Suite
On-line analysis and control of particulate processes
Session Chair: David Merrifield |
Packwood Suite
Bulk powder characterisation
Session Chair : Paola Lettieri |
11.00-11.20 |
056 Measurement of charge transfer due to single particle impact
H.Watanabe, A.Samimi, Y.Ding, M.Ghadiri et al. |
50 New approaches for sludge management in the nuclear industry
J.Hastings, D.Rhodes, A.Fellerman, D.McKendrick |
123 Effect of shear displacement on the angle of wall friction between glass and stainless steel over a range of shear velocities
J.Ratnaswamy Pillai, R.J.Berry, M.Bradley |
11.20-11.40 |
004 Obtaining particle size distribution from chord length measurements
M.Li, D.Wilkinson, K.Patchigolla |
044 Swirling particle-bearing flows in pipes
T.Jones, C.Ariyaratne, R.J.J.Tonkin, D.Rhodes |
017 Validation of a digital packing algorithm in predicting powder packing densities
X.Jia, M.Gan, R.A.Williams, D.Rhodes |
11.40-12.00 |
014 Optical characterisation of polydisperse particulate systems in the NIR region using a single integrating sphere method
M.A. Velazco-Roa, S.N. Thennadil |
109 Dynamic measurement of critical flow parameters for slug flow pneumatic conveying
T.Krull, M.G.Jones, A.W.Roberts |
103 Ultrasonic particle sizing of badly defined material systems
F.Babick,M.Stintz,A.Richter |
12.00-12.20 |
016 Automated particle size and shape measurement using image analysis-particle characterisation takes shape
C.Crompton |
121 Evaluation of particle degradationdue to high speed impacts in a pneumatic handling system
T.Deng, R.J.Farnish, M.Bradley |
111 Characterisation of stringy, compressible bulk waste materials in relation to reactor vessel design
A.W.Roberts, L.N.Birch, M.G.Jones, C.A.Wheeler |
12.20-13.15 |
Lunch |
13.15-14.05 |
HUGH STITT
Particulate Product Performance- As You Like It |
| |
Ballroom
Measurements methods for size,shape and surface structure
Session Chair: Richard Holdich |
Blenheim Suite
On-line analysis and control of particulate processes
Session Chair: Kevin Kendall |
Packwood Suite
Bulk powder characterisation
Session Chair: John Dodds |
14.10-14.30 |
098 Round robin test results by laser diffraction method for reference glass particles distributed by APPIE
Y.Mori, H.Yoshida and H.Masuda |
008 Process design of an energy-from-waste combustion plant
L.Yassin, P.Lettieri, S.Simons, A. Germana |
095 Effects of operating parameters of high shear granulator on the evolved properties and structure of calcium carbonate granules
C.C.Kwan, M.Ghadiri, Y.Ding, R.A.Williams |
14.30-14.50 |
035 Measuring size distribution of organic crystals of different shapes using different technologies
K.Patchigolla, M.Li, D.Wilkinson |
036 The use of Rheological Measurements to characterise the stability of dispersions
R.Buscall and A.Hill |
019 Use of lattice Boltzmann method to facilitate characterisation of pore networks in porous media
X.Jia, C.Xu, R.Williams |
14.50-15.10 |
037 The use of exact light scattering theory for spheroidal Ti02 pigment particles
J.P.Jalava |
129 In-line comparison of particle sizing of aqueous dispersions based on laser diffraction and time-of-transition
H.Saveyn, R.Govoreanu, P.Van der Meeren, P.Vanrolleghem
|
021 A study of the stability and dynamics of gas-fluidized beds using a revised particle bed model
L.Mazzei, P.Lettieri, T.Elson, D.Colman |
| 15.10-15.30 |
124 Experiences with dry dispersion and high-speed image analysis for size and shape characterisation
W.Witt, U.Kohler, J.List |
041 Use of a binary system of particles to investigate particle retention in a gas fluidised bed containing parallel inclined plates
K.Galvin, A.M.Callen, B.Moghtaderi |
116 Resonant effects in vibrational fluidisation of granular materials
C. Wensrich, A. Collard
|
15.30-16.00 |
Coffee |
16.00-16.20 |
047 Size and shape characterisation of dye flocs during chemical coagulation of reactive black 7 dye
M. Janeczko, S.Gaydardzhiev |
024 Particle size measurement to determine coating and microencapsulation efficiency made by supercritical fluid processing
M.Calderone, E.Rodier, J.Fages |
029 Computational simulation of industrial powders: A validation study
O.Owoyemi ,P..Lettieri, R.Place |
16.20-16.40 |
070 Shape monitoring and classification in pharmaceutical crystallisation based on on-line imaging and image analysis
J.Calderon De Anda,X.Wang,K.Roberts |
031 Understanding the dynamics of fluidised beds for process control
A.J.Croxford, A.J.L.Harrison, M.Gilbertson |
131 The Use of In-Situ particle characterisation to optimize tablet manufacturing
Ian A Haley |
16.40-17.00 |
082 Applying LDS to monitor flocculation in papermaking
M.G.Rasteiro, F.P.Garcia, M.delMar Perez |
114 An investigative study into the prediction of permeability of binary mixtures
T.J.Donohue, C.M. Wensrich |
079 Understanding intra-mixture interactions in the breakage of dense particulate mixtures
A.Abu-Nahar, J.Baxter, U.Tuzun |
17.00-17.20 |
088 Morphological characterisation of particles as a tool for process fingerprinting
F.Stepanek, M.A.Ansari |
Free |
097 Ultrasound for characterising concentrated particulates at high ionic strength
A.Duhkin, S.Dukhin, P.Goetz |
17.20-19.00 |
Poster Session and Exhibition Closes |
20.00 - |
Conference Dinner |
| This is a provisional draft. In order to retain a balance of interest, we reserve the right to alter the running order at a later date. |
|
Friday 23rd September 2005 |
08.30-09.20 |
DAVID PARKER
How Radioactive Particles Can Help You Understand Your Processes |
| |
Ballroom
Measurements methods for size,shape and surface structure
Session Chair: Gareth Brown |
Blenheim Suite
On-line analysis and control of particulate processes
Session Chair: Derek Wilkinson |
Packwood Suite
Tracking particles in processes
Session Chair: Mark Gilbertson |
09.25-09.45 |
102 Evaluation of particle imaging data from concentrated suspensions using the algorithm of dynamic extinction measurement
B.Wessely, S.Gabsch, J.Altmann |
048 Milling of sucrose
C.C.Kwan, W.Yang, Y.Ding, M.Ghadiri |
062 Tomography to probe supersaturation distribution in a batch temperature-controlled crystallisation
M.Bennett, R.Hammond, M.Wang, SJ.Stanley et al |
09.45-10.05 |
106 Fractionation of sub-sieve particles using slotted microfiltration membranes
R.G.Holdich, S.R.Kosvintsev, I.Cumming, G.Spicer |
110 Influence of flow properties and geometry on chute design and performance
A.W.Roberts, C.M.Wensrich and R.E.Stratton |
038 Rheological studies of aerated solid materials
G.Bruni, P.Lettieri, T.Elson, J.G.Yates |
10.05-10.25 |
092 Characterisation of reference standards by laser diffraction particle size analysis
B.Brookman, R.Bunker, J.Mitchell, G.R.Rideal |
023 Imaging of solids distribution and precipitation reactions using Electrical Resistance Tomography (ERT)
Steve Stanley, R Mann, K Primrose
|
018 Some applications of X-Ray tomography in powder technology
X.Jia, D.Golchert, R.A.Williams |
10.25-11.00 |
Coffee |
11.00-11.20 |
081 AFM study of adhesion between polystyrene particles ;- the influence of relative humidity and applied load
J.Cleaver, L.Looi |
083 Bend pressure drop predictions using the Euler-Euler model in dense phase pneumatic converying
D.McGlinchey, A.Cowell, E.A.Knight, J.R.Pugh et al |
101 Three dimensional representations of powder mixedness using a positron emission tracking technique
B.Armstrong, A.Ingram, D.J. Parker, X.Fan |
11.20-11.40 |
133 Measurement of Airborn Particles from 0.8nm to 30 micron
C.Gerhart, T.Rettenmoser, M.Richter & H.Grimm |
119 Approaches to control the quality of cementitious PFA grouts for nuclear waste encapsulation
G.Rice, N.Miles, S.Farris |
080 Intermediate processing of polymer-silica hybrid nanoparticles using x-ray microtomography
O.Gundogdu, P.M.Jenneson, U.Tuzun, G.Gray |
11.40-12.00 |
053 Kinetics of a solution mediated polymorphic transformation of glutamic acid determined through application of in-situ powder x-ray diffraction
R.Hammond, X.Lai, C.Y. Ma, E.Purba |
061 Mixing effects during cooling crystallisation of an organic salt probed by electrical resistance tomography (ERT)
M.Bennett, R.Hammond, M.Wang, SJ.Stanley et al |
087 Computer simulation of microstructure evolution in spray-dried particles
A.O.Osunde, F.Stepanek |
12.00-12.20 |
115 Development of in-situ surface area analysis for detonators
A. Hazlewood, E.Edmonds, T.Lilly, J.Mansell |
069 Evaluation of the mechanical resistance of a powder-powder coating by modulated dry feed particle size analysis
L.Conception, A.Vilela, P.Accart, A.Chamayou |
089 Improving 18F adsorption on single particles using surface modification for positron emission particle tracking
X.Fan, D.J.Parker, A.Ingram, M.D.Smith |
12.20-12.40 |
075 Granulomorphometry of pharmaceutical powders down to 0.5 microns
F.Schwartz, B.Miller, V.Chapeau |
132 Extended drift flux models for waste water sludges
D. J. Burt and M.A. Gilbertson
|
Free
|
12.40-13.00 |
Conference Close |
Opening of PSA 2005
DR. Graham Fairhall – Nexia Solutions
Plenary Contributors
Concentrated Dispersions - Wireless Intelligent Particles – Richard Williams
Nanoparticles- characterisation & Kinetics - Richard Challis (Nottingham University)
Measurement methods for size shape and surface structure – Arnie Duncan (USA, TL)
The Use Of Bulk Properties For The Prediction Of Pneumatic Conveying Performance – Mark Jones (University of Newcastle, Australia)
Particulate Product Performance – Hugh Stitt
How Radioactive Particles Can Help You Understand Your Processes - David Parker (Birmingham University)
|