PSA 2005 :: Abstracts

Welcome

Advisory Board

Papers

Information for abstracts

Instructions for authors

Exhibitor Invitation

Venue

Conference Format

> Abstracts

Posters

Registration Form

PSA 2005 Abstracts

Deformation of NaCl particle in contact at the nano-scale	K. Kendall
A Novel Experimental Study of Temperature Enhanced Cohesive Interparticle Forces	Stefaan Simons
Obtaining Particle Size Distribution from Chord Length Measurements	Mingzhong Li
Optical Characterisation of the Stability of Concentrated Dispersions	L. Brunel
Strength and behaviour of reactive liquid bridges between alkaline particles	Sarah Germana
Appropriate Scales and Technologies for Energy Recovery by Thermal Processing of Waste in the Urban Environment	Liban Yassin
Micron sized nano-materials	Alan Rawle
A vision system for aggregates particle measurement	Weixing Wang
Optical Characterisation of Polydisperse Particulate Systems in the NIR Region using a Single Integrating Sphere Method.	M.A. Velazco-Roa
Automated Particle Size and Shape Measurement using Image Analysis - Particle Characterization Takes Shape	Carl Crompton
Validation of a digital packing algorithm in predicting powder packing densities	Xiaodong Jia
Some applications of X-ray tomography in powder technology	Xiaodong Jia
Use of lattice Boltzmann method to facilitate characterization of pore networks in porous media	Xiaodong Jia
Development of solid phase viscosity models in turbulent fluidised beds	Luca Mazzei
Particle Surface Polymerisation of Stimulus-Responsive Brush Layers: Preparation and Characterisation	Grant B. Webber
Imaging of solids distribution and precipitation reactions using Electrical Resistance Tomography (ERT)	Steve Stanley
Measurement of size in order to qualify a coating efficiency	M. Calderone
Protein and nanoparticle characterisation using light scattering techniques	Michael Kaszuba
Development of a Photon CorrelationSpecroscopy Instrument to Measure Size Distributions of Nanoparticles	Tetsuji Yamaguchi
Langrangian aspects of multiphase and multibody flows	Ian Eames
SimultaneousDeposition of Powder in Three Parallel-Oriented Dies of Cylindrical and Toroidal Shapes	Virendra Puri
Computational Modelling of Bimodal Gas Fluidised Beds	lumuyiwa Owoyemi
The Effect of Ion Valency and Concentration on the Transport Properties of Oxide Dispersions	Amy Tindley
Understanding the dynamics of fluidised beds for process control	.J.Croxford
Characterisation of the suspension properties of nuclear waste simulants	Lisa Mason
The Influence of yield stress on the re-suspension properties of nuclear waste simulants	Lisa Mason
Measuring size distribution of crystals and other particles of different shapes using ultrasonics	Kumar Patchigolla
The use of Rheological Measurements to characterise the stability of dispersions	Rob Marsh
The use of exact light scattering theory for spheroidal TiO2 pigment particles	Juho-Pertti Jalava
The effect of process conditions on the fluidization behaviour of gas fluidized beds	Giovanna Bruni
Using Discrete Element Analysis to Analyse the Sensitivity of Granular Material response to Particle Geometry	Catherine O'Sullivan
Use of a binary System of Particles to Investigate Particle Retention in a Gas Fluidised Bed Containing Parallel Inclined Plates	Kevin Galvin
Swirling Particle-Bearing Flows in Pipes	Trevor Jones
A Mechanistic Theory Based Dimensional Analysis Model for Percolation Segregation	Virendra Puri
Comparative studies of dispersant optimisation techniques for evaluating the stability of concentrated alumina slurries	Stoyan Gaydardzhiev
Size and shape characterisation of dye flocs during chemical coagulation of Reactive Black 5 dye	Marta Janeczko
Milling of Sucrose	Chih Chi Kwan
Linear EIT for settling and settled material characterisation	James Cullivan
New Approaches for Sludge Management in the Nuclear Industry	Jeremy Hastings
From single particle interactions to bulk powder flow : application to uranium oxide powders	M. Quintanilla
Kinetics of a solution mediated polymorphic transformation of glutamic acid determined through application of in-situ powder x-ray diffraction	Robert Hammond
A Fundamental Study of the Semi-Continuous Precipitation of Cerium(III)Oxalate	Robert Hammond
Investigation of flow characteristics of nanofluids containing carbon nanotubes	Hajar Alias
Measurement of charge transfer due to single particle impact	Hideo Watanabe
Photoluminescence Properties of Zinc Sulphide Nanoparticles Prepared in W/O Microemulsion System	Yasuyuki Arao
Measuring powder flow properties - A comparison of empirical dynamic measurements with single plane shear cell data	Reg Freeman
Mixing effects during polythermal crystallisation of an organic salt probed by Electrical resistance Tomography (ERT)	Mark Bennett
The influence of dissolving colloid on particulate filtration efficiency	Rafiq Nabi
Monitoring crystallisation of organic materials via ATR FTIR and Ultrasound spectroscopy techniques	Radoslav Penchev
Measurement and modelling of a particulate assembly under confined compression	Jin Ooi
Evaluation of the mechanical resistance of a powder-powder coating by modulated dry feed particle size analysis	John Dodds
Shape Monitoring and Classification in Pharmaceutical Crystallisation based on On-line Imaging and Image Analysis	Jorge Calderon De Anda
Property mapping of structured products	Dale Gilmartin
Granulomorphometry of pharmaceutical powders down to 0.5 microns	Friedel Schwartz
The Study of the Resuspension Velocity and Pressure Drop of a Slurry Flow in a Small Diameter Pipe	David Harbottle
Understanding intra-mixture interactions in the breakage of dense particulate mixtures	A Abu-Nahar
Intermediate Processing of Polymer-Silica Hybrid Nanoparticles Using X-ray Microtomography	O. Gundogdu
AFM study of adhesion between polystyrene particles;-the influence of relative humidity, applied load and contact time	Jamie Cleaver
Applying LDS to Monitor Flocculation in Papermaking	M.G. Rasteiro
Mass Flow Rate Measurement for Gas-solids Two-phase Flow Based on Thermal Method	Yingna Zheng
A New Strategy of Image Recronstruction for ECT	Cao Zhang
Computer simulation of microstructure evolution in spray-dried particles	A.O. Osunde
Morphological characterisation of particles as a tool for process fingerprinting	F. Stepanek
Improving 18F Adsorption on Single Particles Using Surface Modification for Positron Emission Particle Tracking	X. Fan
The Effect of Hydrodynamic and Mixing on the Precipitation of Calcium Oxalate in a Stirred Tank Reactor	Jennifer Haque
Measurement of the Crystallization Point of Highly Radioactive Solutions	Ged Toon
Characterisation of reference standards by laser diffraction particle size analysis	B.Brookman
Strong Ultrasonic Attenuation by Nano- porous Particles	R W O’Brien
Effects of High Shear Granulator Scale on the Evolved Properties and Structure of Calcium Carbonate Granules	C. C. Kwan
Ultrasound for characterizing concentrated particulates	A.S.Dukhin
Round Robin Test Results by Laser Diffraction Method for Reference Glass Particles Distributed from APPIE	Yasushige Mori
Characterisation of the Dispersion Behaviour of Various Powders in Liquids	C Goalard
Recent developments in membrane emulsification	M. A. Khan
Three-dimensional representations of powder mixedness using a positron emission tomographic technique	B. Armstrong
Dynamic Extinction Analysis of Particle Images in Concentrated Suspensions	Benno Wessely
Ultrasonic Particle Sizing of badly defined material systems	F. Babick
Nanoparticle Systems Characterization in Suspensions	Michael Stintz
Direct Measurement of the Effect of Adhesion on Powder Flow Properties: Experimental and DEM Investigations	Kunal Bose
Fractionation of sub-sieve particles using slotted microfiltration membranes	R.G. Holdich
Fabrication and Handling aspects of highly reactive powders	Peter Towndrow
Dynamic Measurement of Critical Flow parameters for Slug Flow Pneumatic Conveying	T. Krull
Influence of Flow properties and geometry on chute design and performance	Alan W. Roberts
Characterisation of Stringy, Compressible Bulk Waste Materials in Relation to Reactor Vessel Design	Alan W. Roberts
Development and Application of a Uniaxial Type Flowability Tester for Characterising Bulk Solids	Stephen J. Wiche
Development of In-situ Surface Area Analysis for Detonators	Adam Hazlewood(lizedmonds)
Particle size distributionby space or time dependent extinction profiles obtained by analytical centrifugation	T. Detloff
Consolidation of concentrated dispersions of nano- and microparticles determined by analytical centrifugation. Dependence on microrheological properties.	D. Lerche
Approaches to control the quality of cementitious PFA grouts for nuclear waste encapsulation	George Rice
Investigation of the effect of geometric factors and test procedure factors on the failure loci measurements obtained in annular type shear testers.	R.J. Berry
Evaluation of particle degradation due to high speed impacts in a pneumatic handling system	Tong Deng
Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester.	J. Ratnaswamy Pillai
Effect of shear displacement on the angle of wall friction between glass and stainless steel over a range of shear velocities	J. Ratnaswamy Pillai
Experiences with Dry Dispersion and High-Speed Image Analysis for Size and Shape Characterisation	"Wolfgang Witt,"
Parameterisation of a mathematical model to describe the settling behaviour of corrosion products of used nuclear fuel	Joe Small
Nanoparticle tracking analysis- The nanoSight Halo LM10 system	Bob Carr
Characterization Issues in Evaluating the Toxicity of Nanoparticles	Maria Palazeuelos
In-line comparison of particle sizing of aqueous dispersions based on laser diffraction and Time-of-Transition	Hans Saveyn
Terahertz pulsed spectroscopy for characterising particles	Y.C. Shen